Contact us Now
+44 (0) 1933 273444 or
click here
 |
 |
 |
| 1. Measure the length of the creasing rule |
2. Mark the measurement and cut the matrix |
|
 |
|
 |
| 3. Mount the cut piece onto the creasing rule with locator |
4. Repeat cutting and mounting onto all the creasing rules | |
 |
|
 |
| 5. Clean the counter plate to remove any residue from the previous job | 6. Remove all the backing tapes | |
 |
|
 |
| 7. Transfer the matrix and the locator onto the counter plate |
8. Remove all of the locators |